PRD Max Drill

With our expertise in the respective domain, we are involved in offering a technologically advanced range of PRD Max Drill 2000. Fabricated in tandem with the set industry standards, these truck mounted rig gets power from truck engine through transfer gear box from a separate deck engine for better functionality. Our range is appreciated for its high pull-up speed and force. The rod changer with auxiliary winch equipped in the system can be manually operated single pivoted rod changer with 1000 Kg capacity pull-up.

Chat With Us
CAPACITY 6 1/2" to 14" dia bore holes to a depth of 600 mtr
PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box or separate deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam drilling by drag bit (over burden) Roto percussion with DTH hammer
MAST Box type structure
Max Capacity - 30 tons ( 67200 lbs )
Max height - 9 mtr (29.7 ft)
Rod handling capacity - 6.0 mtr (20 ft)
PULL UP AND PULL DOWN By means of twin hydraulic cylinders and wire rope, Reeving Ratio 1:3
MAX PULL UP FORCE Max pull up force - 18635 kgs( 41742 lbs )
Max pull up speed - 49 mtr/min (100.5 ft/min)
Max pull down force - 12635 kgs (280302 lbs)
Max pull down speed - 72 mtr/min (147 ft/min)
ROTARY HEAD Rotary head is powered by two hydraulic motors
Max torque - 6448 Nm
Max speed - 0 to 80 rpm
HYDRAULIC SYSTEM 225 kg / cm2 / (3200 psi)
HYDRAULIC OIL COOLER 90 GPM fin type Cooler fan drive through hydraulic motor
BREAK OUT WRENCH To open the drill joints break out wrench will be provided with rope attached
SPECIAL ATTACHMENT Automatic rod handling arrangement to handle 50 numbers of 20 ft drill rods with remote control
TWO TRUCK ARRANGEMENT One for rig unit and second to carry the compressor
JACKS Four box type hydraulic jacks
WATER INJECTION PUMP Triplex reciprocating pump powered by hydraulic motor
OPTIONAL ATTACHMENT Welding machine, mud pump, diesel filling pump , skid platform with deck engine
COROUSEL ROD CHANGER The pivoted corousel rod changer with 6 rods handling capacity hydraulic operated swing cylinder arrangement and winch of one ton capacity to carry drill rods, casings and hammer tools
Liner Size - 125 mm
Maximum working pressure - 21 Kg/cm2
Maximum displacement - 650 lpm / Suction size - 100 mm
SUITABLE COMPRESSOR 1200 cfm / 350 psi, 1200cfm / 330 psi

Customise Your Rig Compare this rig

Enquire more about the product, Give us your contact and we will solve your questions
The fields with * are Mandatory
Please note that we do not sell your information


Similar Products

  • post-img
    PRD 450 Portable
  • post-img
    PRD 500 Trolley
  • post-img
    PRD 500 VM
  • post-img
    PRD 600
  • post-img
    PRD 650
  • post-img
    PRD Tractor Mounted Rig
  • post-img
    PRD Speed Star
  • post-img
    PRD Max Drill
  • post-img
    PRD OZ Drill
  • post-img
    PRD Max Drill 3000
  • post-img
    PRD Max DR 2000
  • post-img
    PRD Max Drill Autoloader